2000 ml

  • AUTOOL GDI FSI EFI Car Fuel Injector Cleaner Tester Ultrasonic Cleaning Machine

    AUTOOL GDI FSI EFI Car Fuel Injector Cleaner Tester Ultrasonic Cleaning Machine AUTOOL CT500 have 15 injector-specific functions 1. Ultrasonic cleaning: It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors. 2. Idle speed test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector. 3. Medium speed test (0-7.5ms): simulate the engine running at medium speed and test the state of the fuel injector. 4. High-speed test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector. 5. Acceleration test: Simulate the acceleration state of the car and test the performance of the fuel injector. 6. Variable Speed Test: Simulate the variable Speed of the car and test the working performance of the fuel injector. 7. Leak Test: Test the sealing condition of the fuel injector. 8. Idle dpeed sprayability Test: Simulate the engine idling state and test the spraying performance of the fuel injector. 9. Medium speed sprayability test: Simulate the engine medium-speed state and test the spraying performance of the fuel injector. 10. High-speed sprayability test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector. 11. Flow Balance Test: The flow balance test shall be carried out at different speeds. 12. Observation of Fuel Injection Shape: Observe whether the fuel injection shapes and angles of all fuel injection nozzles on the same car are uniform at various speeds. 13. Reverse flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector Strainer (Only for the top fuel supply injector). 14. Leak Detection Test : The leak detection test is to detect the tightness of the injector needle valve under the high pressure of the system. 15. No-disassembly cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters.COMPATIBLE WITH VARIOUS INJEGTOR TYPES It provides 12V, 70V and 120V voltage options, and can drive common fuel injectors as well as other types such as GDI EFI, and FSI injectors.It covers most of the core brand vehicles’ fuel injectors in Europe, America, and Asia.SIX-GYLINDER DESIGN This tool can clean and test up to six fuel injectors simultaneously, providing efficient service. It allows for easy observation and accurate evaluation of the injectors’ condition through comparison The graduated cylinder has a 110ml capacity.LARGE CLEANING TANK With a 2000ml capacity ultrasonic cleaning tank, it can fully clean large fuel injectors.Internal cleaning Or surface cleaning About AUTOOL CT500 Fluid Used： Test Fluid 【The glass cylinders are used to contain testing liquid, which is usually professional fuel injector testing liquid, or industrial alcohol. To avoid corrosion, DO NOT put cleaning liquid or any other corrosive liquid in cylinders. 】 It is recommended to use professional automotive injector test fluids. If not available locally, it is recommended to use medical alcohol with an alcohol content of more than 75% instead of the test solution. Cleaning Fluid 【The ultra-sonic tank is used to contain cleaning liquid, cleaning liquid is usually corresive, please be careful, do not mistake cleaning liquid with testing liquid.】 SMART CONTROL PANEL The CT500 design with HD color display, makes the operation clear and easy to read.COMES WITH VARIOUS CONNECTORS It has replaceable composite joints suitable for a variety of vehicle types. It covers most of the core brand vehicles’ fuel injectors in Europe, America, and Asia.PRACTICAL DRAWER DESIGN It has a convenient drawer at the bottom for storing various components, with labeled compartments for eas organization and access.Packing List:1*AUTOOL CT500 Unit 1*Cleaning Fluid Drain Valve 1* Ultrasonic bath cover 1* Oil rail 6* Nozzle pads 6* Sealing Ring 5* Plugs for oil rail 1* Funnel 4* Fixing Bolt 4* Ultrasonic Cleaning Bracket 1* Pulse Signal Cable 1* Power Cable 6* Adapt Cable 1* User manual with warranty card 6* 11mm adapters 6* 12mm adapters 6* 12.5mm adapters 6* 13mm adapters 6* 13.6mm adapters 6* 14mm adapters 6* 15mm adapters 6* 15.8mm adapters 6* Fit For BMW Special adapters PaymentDelivery detailsTerms of salesAbout usContact usPaymentWe only accept PayPal payments.Payment should be made within 5 days after bidding ends.We are not responsible for buyers’ local taxes.（1） Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.（2）Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.Delivery details We only ship parcel to the address in eBay payment. （1）Please make sure payment address in eBay is correct. （2）Please be known that different shipping service means different shipping charge and shipping time!!! （3）All packages will be added with a tracking number after shipping. Terms of sales（1）Item may be returned for refund or replacement within 30 days of the purchase date. Returned merchandise must be unused, in original packaging and include all accessories. Shipping costs are non-refundable.（2）Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.（3）Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.About us（1）We are a professional worldwide wholesale company, with own factory located in China. We supply many products on Automobile consumer . Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!（2）We are a professional Authorized dealers of AUTOOL，LAUNCH，MRCARTOOL and CMTOOL .（3）Global logistics system：US warehouse, UK warehouse，German warehouse, China warehouse. Contact us（1）Our normal business hour is Monday to Friday 9:00 AM to 6:00 PM Beijing TIME.（2）Please email me through «MY MESSAGES» on eBay, if you have any questions about our listings or inventory or troubles.（3）Welcome your any-time parchase!

  • AUTOOL CT160 Ultrasonic Car Auto Fuel Injector Cleaner Tester Cleaning Machine

    AUTOOL CT160 Ultrasonic Car Auto Fuel Injector Cleaner Tester Cleaning MachineAUTOOL CT160 is a fuel injector cleaning machine newly developed by AUTOOL TECH. It combines ultrasonic cleaning technology and microcomputer oil pressure closed-loop control cleaning and detection technology. This product simulates various engine working conditions and cleans and inspects various automobiles and motorcycle fuel injectors. Its unique design saves weight and volume, while further optimizing the product’s functionality. With a larger cleaning tank and cleaning fluid heating effect, which can achieve better cleaning results.CT160 Original Car Fuel Injector Tester Cleaner Features：1.[Wide range of applications] :CT160 Car Fuel Injector Tester and Heating Cleaner have a good compatibility. Support for more cars and motorcycles to ‘clean’ and ‘test’ fuel injector. And also can be used to ‘clean’ diesel fuel injectors. 2.[Easy to operate ] :When cleaning, fix the car injector in the socket of the washing tank, add an appropriate amount of 3M cleaning fluid, and the cleaning can be completed after power on; when testing, fix the car injector in the oil separator and add it to the glass tube Industrial alcohol, the test can be completed after power on. 3.[Leading technology] :At present, only our company produces this portable and multi-functional automobile fuel injector cleaning and testing machine, and it has obtained a special patent. 4.[Safety]:Its working voltage range is 110-230V. When the machine is short-circuited, the fuse inside will automatically trip to shut down the running machine to prevent electric shock. 5.[3 year warranty]:For damage caused by non-human factors, we promise to resend parts for free within 3 yearsUltrasonic CleaningIt can perform ultrasonic cleaning on single or multiple injectors simultaneously,which can eliminate thoroughly blockages on the injector accessories and internal.Heating the Cleaning FluidAUTOOL CT160 is able to heat the cleaning fluid in the cleaning tank,which can improve the cleaning effect on injectorsDistinctive Shape DesignCompact,Lightweight,Portable,Net only weighs 8kg;large capacity Ultrasonic cleaning tank of 2000ml,all cleaned at once. Recovery Cleaning FluidUsed cleaning fluid and testing fluid can be easily recovered. Wide Range of ApplicationsSupports most of the cars and motorcycles among the market. Technical parameters:Tank capacity:2000 ml Range of rotation:0-7500r/min PWM pulse width:0～20.0ms step 0.1ms Time:0～20min Cleaning frequency:28 kHz Cylinder volume:100 ml Injection times:0～9900 times, step 100ms System pressure:0～0.6Mpa Ultrasonic cleaning power:70W Package dimensions:340*295*360mm How to work1.AUTOOL CT160 Fuel Injector Cleaner Tester.2.Pour in the injector detergent and place the injectors in the ultrasonic cleaner tank.3.Connect the pulse signal wire and select the ultrasonic cleaning function to start working.4.Pour in the test liquid, install the fuel injector to the fuel distributor and fix it to the main unit by bolts.5.Test if the injector is leaking or blocked under different functions.Package includes:1pc* AUTOOL CT160 Fuel injector diagnostic and cleaning Cleaner Machine main unit1pc*Refilling funnel，Ultrasonic leaning stand，Testing pad2pc* Oil drain valve1pc* Lock pole，Lock nut4pc* Extended plug ，Motorcycle top oil inlet connectorⅠφ10mm，Ⅱφ11mm，Ⅲφ10.6mm，Ⅲφ10.6mm&13.4mm3pc* Plug1pc* Signal wire4pc* Adapter cable1pc* Oil rail1pc* User manual PaymentDelivery detailsTerms of salesAbout usContact usPayment1. We accept PayPal only.2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal (You dont need a PayPal account)3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable4. Please make the payment within 3 days.Delivery details1. Item will be shipped out within 5 working days (except weekends and holidays) after the payment is cleared or received.2. We will send item to your Confirmed Shipping Address in Paypal only.Please confirm your order and address before you bid or pay the item. 3.International Buyers Please Note: 1)Please check with your country customs office to determine what these additional costs will be prior to bidding / buying. 2)Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.Terms of salesItem may be returned for refund or replacement within 30 days of the purchase date. Returned merchandise must be unused, in original packaging and include all accessories. Shipping costs are non-refundable.Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. About usWe are a professional worldwide company, with own factory located in China.We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!It now own four stocks in the world: China warehouse, US&DE warehouse . it is now one of the biggest online commercial corporations in China. Contact usOur normal business hour is Monday to Friday 9:00 AM to 6:30 PM Beijing TIME. Please email me through «MY MESSAGES» on eBay, if you have any questions about our listings or inventory or troubles. All messages be reply within 24hours. Welcome your any-time parchase!

  • Fuel Injector Cleaner Machine Ultrasonic Injector Cleaner Tester Heated Cleaning

    It supports up to 4 injectors for simultaneous ultrasonic cleaning and multi-condition performance testing, perfectly compatible with most cars and motorcycles on the market. 【Powerful Ultrasonic Cleaning Function】 This AUTOOL CT160 fuel injectors cleaner tester machine supports single or simultaneous cleaning of up to 4 fuel injectors.

  • AUTOOL CT500 GDI Injector Tester Cleaner Ultrasonic Petrol Car Cleaning Machine

    AUTOOL CT500 GDI Injector Tester Cleaner Ultrasonic Petrol Car Cleaning Machine AUTOOL CT500 is a comprehensive device that combines ultrasonic cleaning technology with precise microcomputer-controlled cleaning and testing capabilities using a closed-loop oil pressure system. Specifically designed for automotive fuel injectors, this integrated mechanical and electrical equipment can effectively simulate various engine conditions and perform thorough cleaning and testing procedures. It also offers the added convenience of non-disassembly cleaning for fuel injectors and fuel supply systems. Whether you’re in the automotive repair industry, involved in maintenance, conducting research, or engaged in educational training. Adjustable Working Parameters During the detection process, it is possible to precisely adjust the parameters of each function, such as analog speed, pulse width, pulse count, and working time. This allows for a more comprehensive and professional detection.Smart Control Panel Color display and three Adjustable intelligent panel(Functions Selection,Voltages Selection and Working pressure control).Compatible with Various Injector Types It provides 12V, 70V and 120V voltage options, and can drive common fuel injectors as well as other types such as GDI EFI, and FSI injectors.It covers most of the core brand vehicles’ fuel injectors in Europe, America, and Asia. Large Cleaning Tank With a 2000ml capacity ultrasonic cleaning tank, it can fully clean large fuel injectors providing efficient service. It allows for easy observation and accurate evaluation of the injectors’ condition through comparison.Practical Drawer Design It has a convenient drawer at the bottom for storing various components, with labeled compartments for eas organization and access.Come with Various Connectors It has replaceable composite joints suitable for a variety of vehicle types. It covers most of the core brand vehicles’ fuel injectors in Europe, America, and Asia. How to choose cleaning fluid? Cleaning fluid is used to clean deposits (such as carbon deposits) on fuel injectors, and it is usually highly corrosive and flammable. In order to achieve the best test effect, it is recommended to use professional injector ultrasonic cleaning fluid. How to choose test fluid? The test fluid is used to test and judge whether the performance of the fuel injector is in good condition. It is a colorless and transparent liquid with no irritating odor, non-corrosive. Its function is to simulate various working states of the fuel injector as a medium. it is recommended to use professional automotive injector test fluids. If not available locally, it is recommended to use medical alcohol with an alcohol content of more than 75% instead of the test solution. Package Include: 1*CT500 Fuel Injector Machine 1*Cleaning Fluid Drain Valve 1* Ultrasonic bath cover 1* Oil rail 6* Nozzle pads 6* Sealing Ring 5* Plugs for oil rail 1* Funnel 4* Fixing Bolt 1* Ultrasonic Cleaning Bracket 1* Pulse Signal Cable6* Adapt Cable 1* Power Cable 6* 11mm adapters 6* 12mm adapters 6* 12.5mm adapters 6* 13mm adapters 6* 13.6mm adapters 6* 14mm adapters 6* 15mm adapters 6* 15.8mm adapters 6* Fit For BMW special adapters1* User Manual PaymentDelivery detailsReturn PolicyAbout usContact usPayment1. We accept PayPal only.2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal.3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable.4. Please make the payment within 3 days.Delivery details1. We ship to WORLDWIDE .2. Item will be shipped out within 1-2 working days (except weekends and holidays) after the payment is cleared or received.3. We will send item to your Confirmed Shipping Address in Paypal only.Please confirm your order and address before you bid or pay the item.4.International Buyers Please Note: 1)Please check with your country customs office to determine what these additional costs will be prior to bidding / buying. 2)Import duties, taxes and charges are the buyer’s responsibility,please understand. Return PolicyItem may be returned for refund or replacement within 30 days of the purchase date. Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.About usWe are a professional worldwide Professional company. We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer.Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!Contact usOur normal business hour is Monday to Friday 9:00 AM to 6:00 PM Beijing TIME. Please email me through «MY MESSAGES» on eBay, if you have any questions about our listings or inventory or troubles. All messages be reply within 24 hours. Welcome your any-time parchase!

  • AUTOOL CT150 Ultrasonic Fuel Injector Tester Cleaner Cleaning Machine 4 Cylinder

    AUTOOL CT150 is an integrated four-cylinder fuel injector machine. It combines ultrasonic cleaning technology and microcomputer oil pressure closed-loop control technology into one, which can simulate various working conditions of the engine and can clean and test the injectors of automobiles and motorcycles. It has a three-dimensional and nice appearance, which is both drop-resistant and shockproof. It has undergone years of technological and design innovation in which it will solve your fuel injector problems with stable performance and convenient operation.Ultrasonic Cleaning It works by sending an ultrasonic vibration signal to the injector nozzle through the pulse signal line, which makes the stubborn carbon deposit jitter strongly and removes more thoroughly.Reverse Flush & On-vehicle Cleaning On-vehicle cleaning: The unit is equipped with various adapters and couplers that facilitate cleaning on the injectors on vehicle. Reverse flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector strainer (Only for the top fuel supply injector).Cleaning Fluid Recovery Valve After the cleaning is completed, the cleaning fluid needs to be recovered through the valve, which has the advantage of: 1. Damage will be caused to the product of the liquid is left inside the cleaning bath for a long time. 2. The recovered liquid can be reused, thus saving your cost.Multi-Progress AUTOOL CT150 can be used for cleaning and testing four injectors at the same time. With 4 cylinders, it can clean and test four injectors as same time. If 2-cylinder engine, when use the this cleaning machine to clean and test 2 injector (there are 2 connectors in machine should be stoppered).Humanization Control Panel Equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.With the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values.can make the system pressure fast restored to the default values.Wide Application Support for 99.99% petrol car & motorcycle injectors testing and cleaning. Clean and test motorcycle injector, testing function for HONDA YAMAHA SUZUKI SANYANG injectors only. (The motorcycle adapters include the package.)Operation Steps: Ultrasonic Cleaning: Pour in the detergent and place the fuel injector into the ultrasonic cleaning bath. Connect the pulse signal wires and select the ultrasonic cleaning function to start. Injector Testing: First pour in the test fluid, then install the injectors on the fuel distributor, and fix them with bolts. Different functions can be selected to test to see if any of the injectors are leaking or blocked.Main Function: Ultrasonic cleaning Idle speed test (0-20ms) Medium speed test (0-7.5ms) High-speed test (0-4ms) Acceleration test Shift speed test Leakage test Idle dpeed sprayability Test Medium speed sprayability test High-speed sprayability test Reverse flush No-disassembly cleaning Specification: Fuel Tank Capacity: 2000 ml Cylinder Capacity :140 ml Speed Range: 0~7500 rpm Injecting Times: 0~9900 Step: 100ms PWM Pulse: 0~20.0 ms Step: 0.1 ms System Pressure: 0~0.6Mpa (adjustable) Time: 0~20 minute (adjustable) Power of Ultrasonic Cleaning: 70WFrequency of Ultrasonic Cleaning: 28 KHZ±0.5 KHZ Power supply: AC110V±10% Frequency: 60HZ±0.5 Item Size:12.6 x 11.5 x 8.6 inch Environment Temperature: 0℃～＋40℃ Humidity:＜85% Magnetic Field:＜400Ａ/m Spark and fire are prohibited. Package Size:395 x 295 x 370mm Package Weight: about 10kgPackage Include: 1x CT150 Fuel Injector Cleaner Tester 1x Oil Separator 1x Oil Funnel 2x Pulse Signal Cable 1x Cleaning Fluid Drain Valve 2x Fixing Bolt 4x 14mm Cleaning Connector 4x 17mm Cleaning Connector 4x Washer3x Plug 4x Sealing Ring 1x Ultrasonic Cleaning Cover 1x Ultrasonic Cleaning Bracket 1x Power Cable 6x Motorcycle Adapters 1x User Manual Note: Only cleaning liquid can be added to the ultrasonic tank. Glass test tubes can only add industrial alcohol as the test liquid.PaymentDelivery detailsReturn PolicyAbout usContact usPayment1. We accept PayPal only.2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal.3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable.4. Please make the payment within 3 days.Delivery details1. We ship to WORLDWIDE .2. Item will be shipped out within 1-2 working days (except weekends and holidays) after the payment is cleared or received.3. We will send item to your Confirmed Shipping Address in Paypal only.Please confirm your order and address before you bid or pay the item.4. International Buyers Please Note: 1)Please check with your country customs office to determine what these additional costs will be prior to bidding / buying. 2)Import duties, taxes and charges are the buyer’s responsibility,please understand. Return PolicyItem may be returned for refund or replacement within 30 days of the purchase date. Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.About usWe are a professional worldwide Professional company. We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer.Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!Contact usOur normal business hour is Monday to Friday 9:00 AM to 6:00 PM Beijing TIME. Please email me through «MY MESSAGES» on eBay, if you have any questions about our listings or inventory or troubles. All messages be reply within 24 hours. Welcome your any-time parchase!

  • CT200 6 Cylinders Ultrasonic Fuel Injector Cleaner Tester Machine Car Motorcycle

    AUTOOL CT200 6 Cylinders Ultrasonic Fuel Injector Cleaner Tester Equipment Car Motorcycle Descriptions: The AUTOOL CT200 injector cleaning and testing machine is designed with wide voltage technology and is suitable for 110V and 220V voltage.It is combined with ultrasonic cleaning technology and microprocessor hydraulic control cleaning detection technology. Fuel pump oil supply simulates low, medium and high engine conditions, cleaning and testing the fuel injectors of the automobile; ultrasonic cleaning can simultaneously clean multiple injectors,which can effectively and completely remove carbon deposit for the automobiles injectors.Give 6PCS Fuel injector (Free Gift)Support For 99% Car Model: Support for Audi，for Australia Ford，for Benz，for BMW，for Brilliance，for Chevrolet，for Chevy，for Chrysler，for Citroen，for Dacia，for Dadi，for Daewo，for Daihatsu，for Demo，for Fiat，for Ford，for GM，for Holden，for Honda，for Hyundai，for Isuzu，for Jaguar，for Kia，for Lancia，for Land Rover，for Mahindra，for Maruti，for Mazda，for Mitsubish，for Nissan，for Opel，for Peugeot，for Porsche，for Renault，for Romeo，for Rover，for Saab，for Seat，for Skoda，for Smart，for Subaru，for Suzuki，for Tata，for Toyota，for Volvo，for VW，for Yamaha,etc. Functions: AUTOOL CT200 Fuel Injector Cleaner & Tester is with English Panel. We can clean and test both petrol car and motorcycle injector with this machine. (motorcycle support HONDA YAMAHA SUZUKI SANYANG only) 1.Ultrasonic cleaning , dismantle the carbide of the injector; 2.injector test. stimulate engine runing condition, test injector in different speed range, Check and test injectors’s injection situation:atomization/sprayingangle/spraying mount/spraying uniformity; 3.leakage and block test; 4.Uniquely designed various compound bonder for all kinds of side-inlet injectors; 5.With reverse flush function, to clean inside out, to improve clean efficiency; 6.With a set of adaptors to clean injectors without dismantling it from the engine;9. Supports most of the petrol cars and motorcycles among the market;The machine works on gasoline injectors instead of diesel injectors. 10.Applicable voltage: Support 110V or 220V power input; 11. Multi-progress: 6 injectors can be tested and cleaned at one time.(It will fit for 4 cylinder after blocking two test tube,So AUTOOL CT200 are fit for 6 Cylinders and 4 Cylinders Car. ) Specification: Fuel Tank Capacity: 2000 ml Capacity of Measuring Cylinder: 125 ml Speed Range: 0~7500 rpm Injecting Times: 0~9900 Step: 100ms PWM Pulse: 0~20.0 ms Step: 0.1 ms System Pressure: 0~0.6Mpa (adjustable) Time: 0~20 minute (adjustable) Power of Ultrasonic Cleaning: 70W Frequency of Ultrasonic Cleaning: 28 KHZ±0.5 KHZ Power supply:AC110V±10% Frequency: 50HZ±0.5 Humidity:<85% Environment Temperature: 10°C~40°C Magnetic Field: <400A/m Spark and fire is prohibited. Operation Step: 1. Clean injector's outside with gasoline or cleaning liquid before open machine 2 Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt. 3 Turn on ultrasonic system，pulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors. 4 Fixed injectors on main machine 5 Testing injectors for resistance, shorts, and current draw 6 Performing leak test, spray pattern, and flow rate testing on flow bench. 7 The injectors are now returned to the flow bench for retesting of all functions. Package include:1pc X AUTOOL CT200 Petrol Car Injector Tester Main Unit 2pcs X Valve (for discharging fluid from machine tank) 6pcs X Cleaning connector 6 pcs X Sealing ring 6pcs X Washer fittings 5pcs X Plugs 1pc X Ultrasonic cleaning bracket 1pc X Ultrasonic cleaning cover 1pc X Power cable 1pc X Funnel 1pc X Oil separator 2pcs X Pulse signal cable 2pcsX Fixing bolt1 x Manual(English)Free gift： 6*motorcycle injector connector PaymentDelivery detailsTerms of salesAbout usContact usPayment 1.Bank card,Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) and Paypal payment can pay for the order2. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable ! 3. Please make the payment within 3 days. Delivery detailsWe only ship parcel to the address in eBay payment.Please make sure payment address in eBay is correct. 1. We'll send package to you within 3 business days from overseas warehouses after getting your payment .Some shipping services provide an estimate for the number of days that it will take the carrier to deliver the item to the buyer.This transit time does not include the seller's handling time..Transit time includes normal weekdays. Often Saturdays, Sundays, and major holidays are not included in transit time estimates. 2. Any non-received items caused by invalid address registered on eBay are not in our full refund or replacement policy. 3. According to your choice, we can provide standard shipping methods and paid courier services.4.Usually we ship the package via: Fedex,UPS/USPS, GLS, DHL,Aramex,SpeedPak,etc. Terms of sales1. Item may be returned for refund or replacement within 30 days of the purchase date. Returned merchandise must be unused, in original packaging and include all accessories. Shipping costs are non-refundable. 2. Defective products may be returned for repair up to 1-3 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process. 3. Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.About us1. We are a professional worldwide wholesale company, with own factory located in China. A shop specializing in auto repair tools, please pay attention to us! 2. We are a professional Authorized dealers of AUTOOL and MR CARTOOL . Also offer reasonable prices , excellent customer service and a reliable credit standing are our target! 3. It now own four country warehouses in the world: China warehouse, United States warehouse, United Kingdom warehouse and Germany warehouse. it is now one of the biggest online commercial corporations in China.Contact us1. Our normal business hour is Monday to Friday 9:00 AM to 6:00 PM Beijing TIME,which is 9 pm to 6 am Eastern Time. 2. Please email me through "MY MESSAGES" on eBay, if you have any questions about our listings or inventory or troubles. Welcome your any-time parchase! 3. In order to provide you the best service, please treat the transaction fairly. Positive Feedback and 5-stars of DSR are our life, before you leave a neutral or negative feedback, please DO contact us to get a better solution, We work hard to make sure every customer 100% satisfied and resolve any problem for you.

  • AUTOOL CT150 Ultrasonic Fuel Injector Cleaner Tester Injector Cleaning Machine

    fast shipping,3-7 days delivery AUTOOL CT150 Fuel Injector Tester & Cleaner is a professional 4 cylinders auto fuel injector testing cleaning machine. It is equipped with a pressure gauge which can make the test more precise and easier.Perfectly suit for removing carbon from gasoline cars and motorcycles fuel system, testing leaking, cleaning spark plug, testing injection of injector. Function Explanation:🏆1.Ultrasonic CleaningUltrasonic cleaning is to use the penetrating and cavitation shock waves generated when ultrasonic waves propagate in the medium, and powerfully clean objects with complex shapes, cavities and pores to completely remove stubborn carbon deposits on the fuel injector. 🏆2.Injector TestingThis function is to detect the atomization, dripping, blockage, fuel injection angle status of the fuel injectors and the size and balance of the fuel injection of each fuel injector at different speeds.Features:1. [Fuel Injector Tester & Cleaner]: AUTOOL CT150 can be used both for cleaning and testing injectors. Perfectly suited for removing carbon from your fuel system, testing leaking, sprayability and testing fuel injectors in different situations.2. [Hi-tech Ultrasonic Cleaning]: Built-in Ultrasonic mechanism. Different from the traditional way, it works by sending an ultrasonic vibration signal to the injector nozzle through the pulse signal line, which makes the stubborn carbon deposit jitter strongly and removes it more thoroughly.3. [Efficient & Labor-free]: 4 injectors can be tested and cleaned at one time. Support reverse cleaning & on-vehicle cleaning. Plus, it can also be used on 6 cylinders, twice tests will do.4. [Portable & Durable]: Tool trolley makes it more convenient to operate. Equip with high-quality pump, which makes it more endurable.5. [3-YEAR WARRANTY]： For damage caused by non-human factors, AUTOOL promise to resend parts for free within 3 years. For any needs, you are warmly welcome to contact us and we will get back to you ASAP within 24 hours. Ultrasonic Cleaning Reverse Cleaning&On-vehicle Cleaning Fuel Injector Test: 1.injecting flow test 2.sprayability test 3.leaking test 4-Cylinder Injector Cleaner Tester It can test 4pcs fuel injection nozzlesand clean more fuel injection nozzlesat a time. Widely ApplicationSupport 95% Petrol Car &motorcycle GDI injectors testingand cleaning Ultrasonic Cleaning Fuel Injector Testing 1.Pour in the detergent and place the fuel injector in the ultr asonic cle aner. 2.Connect the pulse signal wire &se lect the ultrasonic cle aning function to start working. 1.Pour in the test liquid, install the fuel injector to the fuel distributor and fix it to the main unit by bolts. 2.Test if the fuel injector is leaking or blocked under different functions. About the cleaning liquid and testing liquid:1.What liquid I can use for the checking ?Test liquid:Inedible alcohol.2. What liquid for the cleaning mode of this machine?Special injector cleaning liquid,such as 3M injector cleaning liquid. Working Condition:Power supply: AC220V/AC110V±10%Frequency: 50HZ±0.5Humidity: ＜85%Environment Temperature: 0℃～＋40℃Magnetic Field: ＜400Ａ/mSpark and fire are prohibited. Specifications:Fuel Tank Capacity: 2000 mlCapacity of Measuring Cylinder: 125 mlSpeed Range: 0~7500 rpmInjecting Times: 0~9900 Step: 100msPWM Pulse: 0~20.0 ms Step: 0.1 msSystem Pressure: 0~0.6Mpa (adjustable)Time: 0~20 minute (adjustable)Power of Ultrasonic Cleaning: 70WFrequency of Ultrasonic Cleaning: 28 KHZ±0.5 KHZWeight:10KG Package includes:1pcs * AUTOOL CT150 Fuel Injector Cleaner Tester Main Unit;1pcs * Oil Separator;1pcs * Funnel; 2pcs * Pulse Signal Cable;1pcs * Cleaning Fluid Drain Valve;2pcs * Fixing Bolt; 4pcs * 14mm Cleaning Connector; 4pcs * 17mm Cleaning Connector;4pcs * Washer; 3pcs * Plug; 4pcs * Sealing Ring; 1pcs * Ultrasonic Cleaning Cover; 1pcs * Ultrasonic Cleaning Bracket; 1pcs * Power Cable; 1pcs * CT150 User Manual.

  • AUTOOL CT160 Auto Car Fuel Injector Cleaner Tester Ultrasonic Cleaning Machine

    AUTOOL CT160 Automotive Fuel Injector Cleaner is a highly efficient, multi-functional cleaning device designed for the cleaning and testing of automotive fuel injectors. It combines ultrasonic cleaning technology, unique heating function and advanced testing function to completely remove carbon and impurities from the injector nozzles and restore their optimal injection effect. AUTOOL CT160 is easy to operate and has a wide range of applications, making it an essential tool for automotive maintenance.Ultrasonic heating cleaningUniformity DetectionAtomization observationSupports 99% of carsTightness Test AUTOOL always selects long-lasting and durable product materials, adheres to the production process of excellence, and upholds the spirit of revolution and innovation, committing to creating products with innovative and superior quality for users.Why Choose AUTOOL?Premium Tough Quality3 Year WarrantyFast & Secure Delivery30-Day Free Returns24/7 Attentive Service It is an expert in injector solutions, featuring 11 injector-specific functions 01. Ultrasonic cleaning: It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors. 02. Idle speed test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector. 03. Medium speed test (0-7.5ms): simulate the engine running at medium speed and test the state of the fuel injector. 04. High-speed test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector. 05. Acceleration test: Simulate the acceleration state of the car and test the performance of the fuel injector. 06. Variable Speed Test: Simulate the shifting state of the car and test the working performance of the fuel injector. 07. Leakage test: Test the sealing condition of the fuel injector. 08. Idle Speed Spray Volume Test : Simulate the engine idling state and test the spraying performance of the fuel injector. 09. Medium Speed Spray Volume Test: Simulate the engine medium-speed state and test the spraying performance of the fuel injector. 10. High Speed Spray Volume Test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector. 11. Unit Info:Display the product number and date of manufacture of the device.HUMANIZATION CONTROL PANEL 1. Working parameter display 2. Start/Pause/Stop 3. Function selection 4. Pressure Adjustment HEATING THE CLEANING FLUID CT160 is able to heat the cleaning fluid in the cleaning tank, which can improve the cleaning effect on injectors.ULTRASONIC CLEANING It can perform ultrasonic cleaning on single or multiple injectors simultaneously, which can eliminate thoroughly blockages on the injector accessories and internal.WIDE RANGE OF APPLIGATIONS Support Motorcycle fuel injectors HONDA YAMAHA SUZUKI SANYANG onlyRECOVERY CLEANING FLUID When the injector cleaning is complete, the cleaning fluid is recovered through the valve, saving you money and protecting the cleaning tank DISTINCTIVE SHAPE DESIGN Compact, Lightweight, Portable, Net only weighs 8kg; large capacity Ultrasonic cleaning tank of 2000ml, all cleaned at once. How to choose cleaning fluid? We recommend the use of a professional injector cleaning fluid, which is readily available at your local supermarket. How to choose test fluid? We recommend using a professional automotive injector testing fluid. If not available locally, as an alternative, we recommend using an industrial alcohol with an alcohol content of more than 75% instead of the test fluid Caution 1. Cleaning fluid is placed in the ultrasonic box for engine carbon cleaning. 2. Test fluid or industrial alcohol is placed in the glass tube for injector testing. Please do not confuse these 2 liquids and do not add other liquids. If you are not sure if the liquid is correct, please contact me in advance with pictures Package includes： 1pc * AUTOOL CT160 Fuel Injector Cleaner Tester Main Unit; 1pc * Funnel 1pc * Ultrasonic Cleaning Bracket 1pc* Test the gasket 1pc* Locking rods 4pcs * Top inlet connectors φ9.8mm 4pcs * Top inlet connectors φ10.5mm 4pcs * Top inlet connectors φ11mm 4pcs * Top inlet connectors φ13.5mm 4pcs * Top inlet connectors φ13.5mm 1pc * Extended plug (used to block the holes on the oil separator) 3pcs* Plugs for oil separator 1pc* Drive signal line 4pcs *Adapter cables 1pc * Oil Separator 2pc * Drain Valve 1pc * Power Cable 1pc* Sealing gasket kit 1pc * User Manua CT160 Car Fuel Injector Tester Cleaner how to work: 1. Clean injector’s outside with cleaning liquid before open machine .Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt.The cleaning fluid does not exceed the connection port of the pulse line. 2. Turn on ultrasonic system allowing the ultrasonic energy to dislodge any particles build-up inside the injectors.After cleaning, the remaining cleaning fluid can be recycled. 3. Fixed injectors on main machine,testing injectors for resistance, shorts, and current draw.The test liquid can be added to the half of the glass tube. 4. Performing leak test, spray pattern, and flow rate testing on flow bench.The injectors are now returned to the flow bench for retesting of all functions.、 MORE PRODUCTSMORE PRODUCTSMORE PRODUCTS 3 YEARS WARRANTY Delivery DetailsMORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY Delivery Details