18kg

  • AUTOOL GDI FSI EFI Car Fuel Injector Cleaner Tester Ultrasonic Cleaning Machine

    AUTOOL GDI FSI EFI Car Fuel Injector Cleaner Tester Ultrasonic Cleaning Machine AUTOOL CT500 have 15 injector-specific functions 1. Ultrasonic cleaning: It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors. 2. Idle speed test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector. 3. Medium speed test (0-7.5ms): simulate the engine running at medium speed and test the state of the fuel injector. 4. High-speed test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector. 5. Acceleration test: Simulate the acceleration state of the car and test the performance of the fuel injector. 6. Variable Speed Test: Simulate the variable Speed of the car and test the working performance of the fuel injector. 7. Leak Test: Test the sealing condition of the fuel injector. 8. Idle dpeed sprayability Test: Simulate the engine idling state and test the spraying performance of the fuel injector. 9. Medium speed sprayability test: Simulate the engine medium-speed state and test the spraying performance of the fuel injector. 10. High-speed sprayability test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector. 11. Flow Balance Test: The flow balance test shall be carried out at different speeds. 12. Observation of Fuel Injection Shape: Observe whether the fuel injection shapes and angles of all fuel injection nozzles on the same car are uniform at various speeds. 13. Reverse flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector Strainer (Only for the top fuel supply injector). 14. Leak Detection Test : The leak detection test is to detect the tightness of the injector needle valve under the high pressure of the system. 15. No-disassembly cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters.COMPATIBLE WITH VARIOUS INJEGTOR TYPES It provides 12V, 70V and 120V voltage options, and can drive common fuel injectors as well as other types such as GDI EFI, and FSI injectors.It covers most of the core brand vehicles’ fuel injectors in Europe, America, and Asia.SIX-GYLINDER DESIGN This tool can clean and test up to six fuel injectors simultaneously, providing efficient service. It allows for easy observation and accurate evaluation of the injectors’ condition through comparison The graduated cylinder has a 110ml capacity.LARGE CLEANING TANK With a 2000ml capacity ultrasonic cleaning tank, it can fully clean large fuel injectors.Internal cleaning Or surface cleaning About AUTOOL CT500 Fluid Used： Test Fluid 【The glass cylinders are used to contain testing liquid, which is usually professional fuel injector testing liquid, or industrial alcohol. To avoid corrosion, DO NOT put cleaning liquid or any other corrosive liquid in cylinders. 】 It is recommended to use professional automotive injector test fluids. If not available locally, it is recommended to use medical alcohol with an alcohol content of more than 75% instead of the test solution. Cleaning Fluid 【The ultra-sonic tank is used to contain cleaning liquid, cleaning liquid is usually corresive, please be careful, do not mistake cleaning liquid with testing liquid.】 SMART CONTROL PANEL The CT500 design with HD color display, makes the operation clear and easy to read.COMES WITH VARIOUS CONNECTORS It has replaceable composite joints suitable for a variety of vehicle types. It covers most of the core brand vehicles’ fuel injectors in Europe, America, and Asia.PRACTICAL DRAWER DESIGN It has a convenient drawer at the bottom for storing various components, with labeled compartments for eas organization and access.Packing List:1*AUTOOL CT500 Unit 1*Cleaning Fluid Drain Valve 1* Ultrasonic bath cover 1* Oil rail 6* Nozzle pads 6* Sealing Ring 5* Plugs for oil rail 1* Funnel 4* Fixing Bolt 4* Ultrasonic Cleaning Bracket 1* Pulse Signal Cable 1* Power Cable 6* Adapt Cable 1* User manual with warranty card 6* 11mm adapters 6* 12mm adapters 6* 12.5mm adapters 6* 13mm adapters 6* 13.6mm adapters 6* 14mm adapters 6* 15mm adapters 6* 15.8mm adapters 6* Fit For BMW Special adapters PaymentDelivery detailsTerms of salesAbout usContact usPaymentWe only accept PayPal payments.Payment should be made within 5 days after bidding ends.We are not responsible for buyers’ local taxes.（1） Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.（2）Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.Delivery details We only ship parcel to the address in eBay payment. （1）Please make sure payment address in eBay is correct. （2）Please be known that different shipping service means different shipping charge and shipping time!!! （3）All packages will be added with a tracking number after shipping. Terms of sales（1）Item may be returned for refund or replacement within 30 days of the purchase date. Returned merchandise must be unused, in original packaging and include all accessories. Shipping costs are non-refundable.（2）Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.（3）Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.About us（1）We are a professional worldwide wholesale company, with own factory located in China. We supply many products on Automobile consumer . Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!（2）We are a professional Authorized dealers of AUTOOL，LAUNCH，MRCARTOOL and CMTOOL .（3）Global logistics system：US warehouse, UK warehouse，German warehouse, China warehouse. Contact us（1）Our normal business hour is Monday to Friday 9:00 AM to 6:00 PM Beijing TIME.（2）Please email me through «MY MESSAGES» on eBay, if you have any questions about our listings or inventory or troubles.（3）Welcome your any-time parchase!

  • Car Engine Intake Exhaust Valve Carbon Deposit Cleaning Machine Walnut Blaster

    What is Carbon Engine Cleaning ?In just 30-90 minutes, your engine could run like new.Our Carbon Cleaning machines have a remarkable cleaning capacity. With this advanced technology,developed over several years, hydrogen is passed through the air intake pipes, burning off up to 85% of the carbon deposits that prevent your engine from running smoothly. Why Carbon Cleaning ?Helps prevents running issues on engine problems, cleans carbon out of vital exhaust components like catalysts and diese/ particulate filters (DPF) and is idea/ to use in conjunction with a DPF regeneration for ultra DPF cleaning.Preventive engine cleaning enables you to restore engine parts rather than replacing them, thereby saving vehicle owners on costly parts.These problems result mainly from poor combustion, which stifles the engine.So before replacing your engine parts, try Carbon Cleaning. A dity engine as the result of carbon deposits is a huge threat to vehicle performance. AUTOOL HTS558 is a de-carbon device for intake valve cleaning, whose working principle is to blast the walnut media into the intake valve through high-pressure airflow. The carbon deposits on the valve and cylinder wall impacted down. The walnut media and carbon deposit mixture can be recycled through special joints.It can deeply remove the sticky carbon deposits on the intake manifold, intake valve and exhaust valve. Effectively solve the problems of unstable idling, insufficient air intake, insufficient power, and insufficient acceleration.Features:➤1.【Deep removal of carbon deposits】Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.（Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.)➤2.【External air source】This enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.➤3.【Built-in dust filter】It can separate the recovered walnut sand grit from carbon deposits for recycling.➤4.【Integrated design】The walnut sand grit can be sprayed and recovered simultaneously.➤5.【3 year warranty】For damage caused by non-human factors, we promise to resend parts for free • Deep removal of carbon depositsDeeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.（Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.) • Can work with external air sourceThis allows the walnut sand grain to hit the carbon deposits more strongly and efficiently.(The air pump pressure should be more than 0.7 MPa (7 bar / 102 PSI)). • Built-in Dust FilterIt can separate the recovered walnut sand from carbon deposits for recycling. • Recycle sand design, save effort and moneyJoin spray gun:for spray powder Recycle hose:for recycled sandWhen the sprayed walnut sand hits the ground and deposited, the walnut sand particles are recycled in the system at the same time recycled in the system at the same time, without manual recycling, saving time and effort. Operation Steps STEP 1Open the top cover of the AUTOOL HTS558 and pour in the walnut powder (2-4 kg), press the dust cover onto the walnut powder and close the cover. STEP 2Connect the mouth of the spray gun to the recycling hose (there is a hole on the recycling hose). STEP 3Remove the engine intake manifold, insert the ignition gun into the intake manifold, turn the crankshaft to close the intake valve. Connect the air pump (not included) to the HTS558. STEP 4Connect the mains power, start the cleaning process. The process should take 1-3 minutes (depending on the carbon deposit). Normally the walnut powder can be reused 5-10 times. Recommend:1.Air pump pressure should more than 0.7Mpa (7bar/102PSI)2.Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB)3.Cleaning time between 1-3 minutes Specifications Application: All vehicles Rated voltage: 110V Nominal frequency: 50/60 Hz Nominal power: 1200W Capacity: 13L Vacuum suction:0.02 MPa Air flow: <300L / min Package dimensions: 400 x 490 x 540 mm Weight: 10kg Package include:1x AUTOOL HTS558 unit;2xwalnut shell(2kg);2x spray gun;1x safety glasses;1x recycling hose;1x recycling hose and spray gun connection

  • AUTOOL CT200 Fuel Injector Cleaner Tester Ultrasonic Car Nozzle Cleaning Machine

    CT200 Injector cleaning and testing machine is designed with wide voltage technology and is suitable for 110V and 220V voltage.It is combined with ultrasonic cleaning technology and microprocessor hydraulic control cleaning detection technology. Fuel pump oil supply simulates low, medium and high engine conditions, cleaning and testing the fuel injectors of the automobile; ultrasonic cleaning can simultaneously clean multiple injectors, which can effectively and completely remove carbon deposit for the automobiles injectors. CT200 supports 99% of injector cleaning and testing. However, for diesel injectors, it only supports cleaning but not testing. Features: Fuel Injector Tester & Cleaner: CT200 injector cleaner can be used both for cleaning and testing injectors. Perfectly suited for removing carbon from your fuel system, testing leaking, sprayability and testing fuel injectors in different situations. Hi-tech Ultrasonic Cleaning: Built-in Ultrasonic mechanism. Different from the traditional way, it works by sending an ultrasonic vibration signal to the injector nozzle through the pulse signal line, which makes the stubborn carbon deposit jitter strongly and removes it more thoroughly. Efficient & Labor-free: 6 injectors can be tested and cleaned at one time. Support reverse cleaning & on-vehicle cleaning. Plus, it can also be used on 8 cylinders, twice tests will do. Portable & Durable: Tool trolley makes it more convenient to operate. Equip with high-quality pump, which makes it more endurable. 3-YEAR WARRANTY： For damage caused by non-human factors, we promise to resend parts for free within 3 years. For any needs, you are warmly welcome to contact us and we will get back to you ASAP within 24 hours Ultrasonic Cleaning Ultrasonic Wave Injector Cleaner and Tester works by sending an ultrasonic vibration signal to the injector nozzle through the pulse signal line, which makes the stubborn carbon deposit jitter strongly and removes more thoroughly. Reverse Cleaning & ON-Vehicle Cleaning Fuel Injector Cleaner & Tester is with English Panel. We can clean and test both petrol car and motorcycle injector with this machine. (motorcycle support HONDA YAMAHA SUZUKI SANYANG only) Multi-progress 6 injectors can be tested and cleaned at one time. Kindly Notice: How to choose cleaning fluid? Cleaning fluid is used to clean deposits (such as carbon deposits) on fuel injectors, and it is usually highly corrosive and flammable. In order to achieve the best test effect, it is recommended to use professional injector ultrasonic cleaning fluid. If it is not available locally, it’s recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the cleaning fluid, but note that the effect may not good enough. Humanization Control Panel CT200 Injector Cleaner Tester design with HD color display, makes the operation clear and easy to read. Applicable Voltage:Support 110V or 220V power input Multi-Progress: 6 injectors can be tested and cleaned at one time. How to Work ? 1. Clean injector’s outside with gasoline or cleaning liquid before open machine 2. Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt. 3. Turn on ultrasonic system，pulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors. 4. Fixed injectors on main machine. 5. Testing injectors for resistance, shorts, and current draw. 6. Performing leak test, spray pattern, and flow rate testing on flow bench. 7. The injectors are now returned to the flow bench for retesting of all functions. Note: Injector cleaning agent test liquid and cleaning agent precautions 1. It is forbidden to use corrosive liquids as fuel injection nozzle detection liquid to detect fuel injection nozzles. Corrosive liquids will damage machine seals and fuel injectors; 2. It is forbidden to use a cleaning agent instead of the detection liquid, because the cleaning agent is generally corrosive and will cause damage to equipment and injector seals; 3. It is forbidden to use gasoline instead of cleaning agent or test liquid, which is dangerous and easy to cause safety hazards; 4. Please use absolute ethanol (industrial alcohol) or other non-corrosive liquids as the detection liquid (generally the detection liquids are colorless and transparent, no irritating odor liquid). Specifications Power Supply:110/220V Main unit dimensions:405*380*430MM Package weight:17.89KG Package dimensions:485*465*490MM Power of Ultrasonic Cleaning:70W Frequency of Ultrasonic Cleaning:28KHZ±0.5KHZ Note:Oil not included. Package Includes: 1pc X AUTOOL CT200 Petrol Car Injector Tester Main Unit2pcs X Valve (for discharging fluid from machine tank) 6pcs X Cleaning connector6pcs X Sealing ring6pcs X Washer fittings5pcs X Plugs1pc X Ultrasonic cleaning bracket1pc X Ultrasonic cleaning cover1pc X Power cable1pc X Funnel1pc X Oil separator2pcs X Pulse signal cable2pcsX Fixing bolt 1 x Manual(English) 6pcs X Motorcycle Nozzle Fitting Note:Oil not included. AUTOOL FUEL INJECTOR CLEANER Model CT150 CT160 CT180 CT200 Power Supply AC110V/220V±10% AC110V/220V±10% AC110V/220V±10% AC110V/220V±10% Frequency 50HZ/60Hz±0.5 50HZ/60Hz±0.5 50HZ/60Hz±0.5 50HZ/60Hz±0.5 Cleaning Frequency 28KHZ 40KHz 28KHZ 28KHZ Fuel Tank Capacity 2000ml 1300ml 2100ml 2000ml Ultrasonic Cleaner Power 70W 70W 60W 70W Speed Range 0-7500r/min 0-7500r/min 0-7500r/min 0-7500r/min Main Unit Dimensions 300*220*320mm 292*260*273mm 270*310*340mm 405*380*430mm Main Unit Weight 9.3kg 8kg 8.8kg 15.9kg